Hard Drives Explained

Hard drives are pretty much the same as they were a few years back. The fundamentals are the same, but many new technologies have allowed more performance and value to be squeezed from modern hard drives.

A hard drive is an airtight case, the inside is a dirt free environment, essential for avoiding damage to the internal parts. A number of discs, called platters, spin around on a spindle. There can be from one to five platters in a single drive, although most drives just have one. For each platter there is a little arm with a read/write head on the end. There is one arm for each platter, and they reach out over the platter, much like a record player and the head changes the data on the surface. These heads never touch the platter, but float ever so slightly above them.

All drives have this basic design, but utilize other technologies to get the most from the drives. Notably there is often very little difference between competitors when using comparable systems. A 200 GB, 7,200 RPM drive from one manufacturer will be very similar to one from another manufacturer.

Drives come in a few different sizes. The standard desktop hard drive is one inch in height, while models for laptops are 9.5mm or 12.5mm, with the latter becoming too big for current laptop designs. There are also proprietary sizes available.

The number of platter depends on the use of the drive. Most drives only have one platter, which reduces the number of moving parts, namely the arms and heads, resulting in less chance of drive failure. Multiple platters allows for greater storage capacity. Laptop drives can have up to two platters. Desktop drives have 3.5 inch platter, those for enterprise computers or workstations look like 3.5 inch drives, but have 2.5 inch platters inside. Mobile drives have 2.5 and 1.8 inch platters, while some micro-drives use 1 or 0.8 inch platters.

Spindle speed, which is how fast the platters spin in the drive, makes a huge difference to the performance of the drive. Think about it, the faster it can spin, the faster the information that is being looked for will pass beneath the read/write heads, it's just quicker. Server and workstation drives often spin at 10,000 or 15,000 RPM, while desktops typically spin at 7200 RPM, although the WD Raptor is a notable exception that spins at 10,000 RPM. However the price of a Raptor is very high and you pay more for its 150 GB model than for a 500 GB drive.

Notebook drives spin at 4,200 RPM, which is slowly being replaced by 5,400 RPM models. Smaller mobile drives operate at 4,200 RPM, while the micro-drives operate even slower.

The cache that the hard drive uses helps to store data that will be needed and store data that is used very often so that a physical read from the platter is not needed. This gives great speed improvements for frequently accessed data. Drives with a cache will give faster performance. Up to 16 MB is offered on some drives, but 8 MB has been found to be the most worthwhile, as 16 MB provides little extra performance over 8 MB.

The performance difference within a family of hard drives is very little. The biggest differences are found by moving up to 10,000 RPM, but with an obvious price penalty. To get the most value per GB, divide the total price by the hard drive's size in GB and start there.

Article Source: http://www.classesandcareers.net/education

All the other things you could possibly need to know about hard drives can be found at our hard drive guide.

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated